Audiopulse

The REVO is big enough to be classified as an SPL driver, but its performance is not put to non-linear high frequency bass as SPL drivers often are. This driver is truly a larger version of our prided EPIC, but with more excursion, more motor, higher force factor, a larger voice coil, and higher power handling. It sounds every bit as good as our smaller EPIC but it’s robust enough to fulfill the most demanding SPL needs around. Where the REVO stands apart from the pack is with design, intent and our experience to create a world class low distortion high output driver entirely different from the norm. Completed with a field replaceable patented top assembly, large 3” high thermal flat-wound voice coil and a suspension system that actually reduces distortion over less capable designs, the REVO is able to dig deep, play hard and have lower distortion than any 1000 watt RMS driver around. Place it in a small sealed enclosure for space conversation, or combine it with a word class VMP for reference level SPL.

So what makes the REVO so good? Try 195 ounces of iron surrounded by 285 ounces of steel ready to energize your car with serious LFE at 3” of peak to peak displacement, and no, not with folly “8 inch” spiders either, the REVO is armed with a FEA’ed suspension system that matches only the best around. This IS a reference high excursion bass driver and every piece of it is treated that way. We even allow the top assembly to be removed with minimal effort so that just in case it is damaged, a new replacement can be shipped out and installed within only a few days. Yes, we do give this driver, and every driver we make, a full life time warranty! Once installed, not only will this cure your upgrade bug for good, but you’ll never have to pay or ship anything for repairs or replacements as long as you own it! That is the Audiopulse way, and we don’t just make the best subs, we back it up like they were!

Design

Flat-wire technology for excellent conductor packing density
Long throw high temp 3″ wide voice coil
10″ linear suspension system with large lead wires for improved durability
Patent pending NBR tall profile FEA surround for excessive travel
Massive 3.5″ conductive shorting ring to improve linearity
Single dish anodized and powder coated alloy heat sink cone
Patented field replaceable top assembly system makes “recones” obsolete
Patented exclusive high excursion frame assembly
High BL promotes inherent small box design to save space without compromise
Distinguished metallic clear blue triple layer powder coated frame
Available in 10″, 12″ and 15″ sizes

Parameters

	10″	12″	15″
Qts	0.38	0.40	0.44
Re	4.6 Ω	4.6 Ω	4.6 Ω
Fs	28 Hz	25 Hz	22 Hz”
Cms	118 µM/N	125 µM/N	135 µM/N
Vas	17.4 lit	43.6 lit	127 lit
Mms	270 g	310 g	390 g
BL	23.0 Tm	23.0 Tm	23.0 Tm
Sd	0.032 m²	0.050 m²	0.082 m²
SPL	81.7 dB	84.1 dB	86.4 dB

Specifications

	10″	12″	15″
Voice Coil Configuration	D2 Ω	D2 Ω	D2 Ω
Mounting Depth	7.35″	8.10″	9.40″
Driver Cutout Diameter	9.25″	11.04″	14.00″
Overall Driver Diameter	10.52″	12.60″	15.61″
Magnet Weight	195 oz	195 oz	195 oz
Driver Weight	32 lbs	34 lbs	37 lbs
MSRP	$449	$525	$599

Performance

	10″	12″	15″
BL²/Re	115 N²/W	115 N²/W	115 N²/W
Xmax	28 mm	28 mm	28 mm
TLS: < 1% BL deviation	18 mm	18 mm	18 mm
Recommended Amplification	1500 W RMS	1500 W RMS	1500 W RMS
4th order reflex enclosure volume	0.8 - 1.5 ft³	1.8 - 2.8 ft³	3.4 - 6.0 ft³
2nd order sealed enclosure volume	0.5 - 1.5 ft³	1.0 - 2.5 ft³	2.0 - 4.0 ft³